Advanced IP Scanner or Angry IP Scanner will do that for you. You can also look in your ARP cache on the local server. Use the command arp -A on the server and it will report back the IP address assigned to MAC addresses and whether they are dynamic or static. @FredM, this is nothing to do with my answer, my question is for network scanning, not for the machine's MAC address – LopDev Sep 22 at 8:58 My question is about finding another device via MAC address – LopDev Sep 22 at 9:04.

About MAC Address Lookup Tool

MAC Address Lookup Tool searches your MAC Address or OUI in mac address vendor database. The MAC Address vendor database consists of a list of mac addresses of all devices manufactured till date. Finding the mac address from this database tells us which manufacturer originally manufactured this device and what is the prefix, postfix of a given mac address, moreover it tells us what country was this device manufactured. All this information is useful if you want to verify the generated mac address with the original vendor of this device in OUI vendor database.

What is a MAC Address?

MAC Address or media access control address is a unique ID assigned to network interface cards (NICs). It is also known as a physical or hardware address. It identifies the hardware manufacturer and is used for network communication between devices in a network segment. MAC Address usually consists of six groups of two hexadecimal digits.

The network adapters or network interface cards always come with a MAC address which is fed into hardware, usually in read-only memory (ROM), or BIOS system. The physical address is stored into the NIC by its manufacturer, that is why this address is also called a burned-in address (BIA) or ethernet hardware address.

There are several NIC manufacturers; some well-known of them are Dell, Cisco, Belkin. The first three sets of two hexadecimal numbers in a MAC Address identifies the card manufacturer, and this number is called OUI (organizationally unique identifier). OUI is always the same for NICs manufactured by the same company. For example, let's say a network card manufactured by dell has a physical address: 00-14-22-04-25-37, in this address, 00-14-22 is the OUI of Dell which identifies that the device is by Dell. It may be interesting for you to know that all the OUIs are registered and assigned to the manufacturers by IEEE.

How to Find MAC Address?

To find MAC Address, see the instructions given below for popular operating systems.

How to Find MAC Address in Windows?

• Go to Command Prompt
• • Press Windows + R
  • Type cmd and press Enter

  OR

  • Click Start Button
  • Type cmd and press Enter
• In Command Prompt, type ipconfig/all and press Enter
• And locate for the 'Physical Address' or 'HWaddr' field. The Physical Address should be in format M:M:M:S:S:S. For example: 00-14-22-04-25-37

How to Find MAC Address in MacOS?

• Click on Apple Menu (usually on top left corner), and click System Preferences
• In System Preferences, click View menu and select Network
• In the Network window that just opened, click the Wi-Fi, Ethernet, or Airport icon on left.
• Now click Advanced on bottom right.
• From the upper menu, click Hardware, and look for MAC Address field.
• Your MAC Address should be in the format: M:M:M:S:S:S. For example: 00-14-22-04-25-37

How to Find MAC Address in Linux or Unix?

• Perform the following as super user (or with appropriate permissions)
• • Type ifconfig -a
  • Look for 'eth0'. This is your default ethernet adapter
  • Now locate the field 'HWaddr'. The value displayed next to it is your MAC Address.
  • Your MAC Address should be in this format: 00-14-22-04-25-37

How to Find MAC Address in iOS?

• Open Settings app.
• Tap on General option in settings.
• Now tap on About option.
• Locate the field Wi-Fi Address
• The value against this field is your MAC Address
• Your MAC Address should be in the format: M:M:M:S:S:S. For example: 00-14-22-04-25-37

Finding a MAC Address in Android

• Method 1:
• • Open Settings app.
  • Select the option Wireless & Networks
  • Select Wi-Fi Settings
  • Select Advanced, and your wireless network card's MAC Address should appear here.
• Method 2:
• • Open Settings app.
  • Select the option About Device
  • Tap on the option Hardware Info
  • Select Advanced, and your wireless network card's MAC Address should appear here.

Scanning for IP address lets you have better control over your network. With 1-2 commands, you can quickly map out the devices in your network and the IP addresses that they are using. But to understand how to scan a network, first, you need to understand how are IP addresses assigned.

DHCP (Assigning IPs Dynamically)

An automated process in networking, called DHCP (Dynamic Host Configuration Protocol), assigns IP dynamic addresses to hosts as soon as they enter the network. In a home or small network, the DHCP server is usually a part of the router. When you come into the network, the router will look for an available IP address in its pool and assign it to you, so that your device can communicate with others without any conflict.

Dynamic allocation of IP addresses is a great advantage for both end-users and network admins. But sometimes you would need to have some control in order to manage and troubleshoot your network more efficiently.

What will you learn in this Tutorial

In this tutorial, you will learn the basic networking skills on how to scan a network for IP addresses. We will scan a network with native OS commands, find which addresses were assigned dynamically, which statically, and test their connectivity.

In the end, we will compare some IP address scanning tools that can give you additional information. To improve your IP addressing insights, even more, we will show you some tools that allow you to track IP addresses and even manage them.

Simple IP Scanning

Operating Systems, like Windows and Linux, come with their own native simple networking set of tools. Commands such as “ipconfig”, “arp -a”, or “ping” allow simple scanning and troubleshooting.

The simplest way to get a quick list of IP addresses and their devices connected to your network is with those OS native commands found in the command line. With a list of the assigned IP address and their devices, you can easily find the devices that are causing the most problems.

1. 1. ipconfig
      This command displays all network settings assigned to one or all adapters in the computer. You can find information such as your own IP, subnet, and Gateway. For Linux and MacOS is “Ifconfig”.
   2. arp -a
      When you issue the “arp -a”, you’ll get IP-address-to-mac conversion and the allocation type (whether dynamic or static) of all devices in your network.
   3. Ping
      It helps determine connectivity between two hosts and find the IP address of a hostname.

Reading The Output

Finding your own network adapter configuration

In the following screenshot, you’ll see the output from the ipconfig command. On a Windows, the ipconfig command can be entered through the Command line.

Go to Run > type cmd > type ipconfig

• This Windows computer has 5 network adapters, but the last one (Wireless LAN adapter Wi-Fi) is the only one connected to a network. The rest are disconnected.
• In this network, the router (or Default Gateway) is playing the role of the DHCP server. It is assigning the IP address dynamically and giving access to the Internet.
• You are reading two of the most important IP addresses for your device; Your own device’s IP (IPv4 and IPv6) and your Gateway. The Subnet Mask is also very important, it shows that you are on the same subnet as the gateway.

Now you know your subnet, which in this case is 192.168.1.0/24 (using the CIDR range). Now you need to find the rest of the IP address in your network.

Scanning your Network

The job of the ARP protocol is to map IPs to MAC addresses. It provides a method for hosts on a LAN to communicate without knowing any address and create a cache of information. When a new computer enters the LAN, it receives an IP and updates its ARP cache with the Gateway information. This ARP cache can be found using the “arp-a” command.

• Use the command line to enter the “arp -a” command.

• This computer has been connected for some time into the LAN, so its ARP cache is very precise and complete. The first IP address shown in the display is the Gateway (the same we found through the ipconfig command).
• The output shows the IP, the MAC addresses, and their assignation type. The addresses displayed here were dynamically assigned by the DHCP server in the LAN. All of these IPs are devices connected to the LAN (192.168.1.0/24). The other static addresses are reserved for Multicasting.
• With the MAC information, you can know the vendor. Try searching for vendor prefixes or use an automatic online tool such as MACvendors.

Testing Connectivity

Finally, with some information, you can test connectivity. In the following test, we tried an extended ping with “ping -t” to the gateway. With this, you can learn some simple insights about delay and latency.

Scan Network For Mac Address Search

From the list generated by the ARP command, you could ping all the live hosts. Or you can go beyond and ping the entire subnet to find hosts not found by the ARP (but that would be too much manual work…). Later, we’ll discuss how to automatically ping entire subnets at once.

Although having a list of devices and their allocated IP address will give you good insights, the information will not be enough when your network scales. Manual IP scanning in multiple subnets and BYOD (Bring-Your-Own-Device) scenarios is nearly impossible. As the network scales, problems will scale too.

Larger networks demand more results, flexibility, and easy-to-read set of commands.

An IP Address Scanner tool helps you with larger demands. These tools are able to map the entire local network, finds live hosts, and to provide the results of the “arp-a” in a clearer format. Other IP Scanners do not depend on ARP but they operate using repeated ping tests. A Ping Sweep tool lets you ping entire subnets and find live hosts just with one button.

Some other IP Scanners go the extra mile and give more information such as Port number, DNS, DHCP, etc. All of this data is also presented in the most visual and easy-to-read format. They also allow users to save all results and present them in detailed reports.

Advanced IP Scanners

1. Angry IP Scanner

Angry IP Scanner is one of the most popular scanners on the web, with over 29 million downloads. It is open-source, free, and available for Windows, MacOS, and Linux. It can let you scan your local network or the Internet-facing IP addresses.

This tool is not only capable of scanning IP addresses but also ports. When you define an IP address range, you can also specify a number of the port, and see if a device in your network is using a specific service (defined by the port). Angry IP Scanner also lets you save all the scan results into multiple formats, such as TXT, XML, CVS, etc.

When you scan, you’ll know what hosts are alive, their response time, hostname, MAC address, etc. If you want even more information, you can extend results by developing Java plugins.

Price:

Open Source and 100% free.

Download:

Get Angry IP from its official site.

2. SolarWinds Ping Sweep

Ping Sweep from SolarWinds helps you find free IPs and identify which ones are unavailable. It is classified as a networking discovery tool from the SolarWinds Engineer’s Toolset. A comprehensive network software, that includes over 60 handy tools. Ping Sweep from SolarWinds is included in the Engineer’s Toolset and is dedicated for ping testing. For the MAC address, port scans, SNMP scans, etc, there are more dedicated tools in the Engineer’s Toolset.

Just as when you ping from the command line, this tool shows the DNS name for each IP and response time. It can also let you export results in different formats such as CSV, TXT, XLS, and to an HTML page.

Price:

SolarWinds Engineer’s Toolset starts at $1,380.00 and includes over 60 must-have tools.

Download:

Get a fully functional Engineer’s Toolset for 14 days by registering to SolarWinds official site.

IP Address Tracker Tools

Having a map of IP addresses, MAC addresses, used ports, etc, is great for networking inventorying and may help with some troubleshooting cases. But a list can not control and display real-time results.

An IP address Tracker is a good upgrade to our set of tools and commands described so far. It does allow scanning multiple subnets and displaying results, but it also allows you to keep track of one or more IP addresses.

An IP Address Tracker will notice when an IP address is released. This can be either because the device lost connectivity or it changed IP address. It will help you minimize IP addressing conflicts (when two devices are trying to take the same IP) and reduce DNS errors.

3. MyLAN Viewer

MyLAN Viewer is a NetBIOS and IP address scanner for Windows systems. Just like the IP Scanners shown above, this tool will scan a network and show devices in an easy-to-read format.

But MyLANViewer goes beyond, and not only shows computer name, IP, and MAC, but also NIC, OS version, logged users, shared folders, and much more.

This tool is able to track specific IP addresses and show notifications when their state change. With it, you can also keep track of network security by showing port information and detecting rogue DHCP servers. MyLAN Viewer tracks all devices in the subnet including hidden, and displays alerts when new devices enter the network, and others go.

This tool can also display the following metrics as well:

• Display Whois data.
• Perform traceroute.
• Manage “Remote Shutdown and Wake On LAN (WOL)”.
• Monitor wireless networks.

Price:

Free, but only available for Windows systems.

Download:

Get MyLAN Viewer from its official site.

4. SolarWinds IP Tracker

SolarWinds IP Tracker is a standalone software and completely free. In addition to creating inventories of all devices, this tool allows you to scan, track, and manage IP address, including their event logs, all in a single place. SolarWinds IP Tracker is the free version and feature-limited of the much coveted IP Address Manager.

But the IP Tracker does an amazing job to provide a centralized view of the entire IP addressing scheme. It lets you monitor 256 (one subnet) IP addresses for free. Additionally, this tool allows basic management functionalities with tools such as, Ping, Telnet, Traceroute. The best of all is that, with SolarWinds IP Tracker you can detect IP address conflicts created by misconfigured DHCP servers.

SolarWinds IP Tracker is only supported by Windows systems.

Price:

Scan Network For Mac Address App

100% Free.

Download:

Register in SolarWinds to download the software for free.

IP Address Management (IPAM)

Basic IP Address Scanning should be enough to manage small networks. But when networks scale they depend on multiple subnets and detailed management requirements. Although SolarWinds IP Tracker is able to find IP address conflicts, it is not able to control them.

Sometimes large-scale networks have standalone DHCP and DNS Servers in order to assign addresses to multiple subnets. But IP conflicts occur and it is really challenging to manage them manually. An IP Address Management or “IPAM” is a piece of software able to actively control DHCP and DNS. It also gives you the ability to manage multiple subnets.

5. SolarWinds IP Address Scanner

Among SolarWinds powerful tools, the IP Address Manager does everything a large-scale enterprise needs to manage its addresses properly. It automates many processes to make IP Address management easier. From automated IP address tracking, quick static IP reservations, to multi-vendor DHCP and DNS support.

SolarWinds IPAM comes with an integrated IP address management, DHCP, and DNS tools to administer your entire network.

One of the most commonly used tools from this bundle is the IP Address Scanner. This tool allows you to create automated IP address scans to maintain an updated inventory of all IP address blocks in the network. This is achieved by sending regular ICMP and SNMP polls. The automatic scans use ICMP polls to gather status of the IP address and hostname information. It also uses SNMP to find information on MAC addresses and other vendor information. SolarWinds IP Address Scanner supports both IPv4 and IPv6 address management.

SolarWinds IPAM also provides detailed reports of your IP address in real-time.

Price:

Scan Network For Mac Address Settings

Download the Free Trial for 30 Days!

Download:

Scan Network For Mac Address Labels

Get a fully functional SolarWinds IPAM for 30 days by registering to SolarWinds official site.